1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages. 2. Immerse the engine coolant temperature sensor and a thermometer in water. CAUTION: Take care not to allow water to get into the engine coolant temperature sensor connector. Completely remove any water inside.
3. Raise water temperature gradually, measure the resistance between the engine coolant temperature sensor terminals when the temperature is 20°C (68°F) and 80°C (176°F). NOTE: Agitate the water for even temperature distribution.
|
Removal
WARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:Be careful not to spill fuel.1. Release the fuel pressure. Fuel > PROCEDURE2. Open the fuel filler lid and remove the fuel filler cap.NOTE:This operation is required to release the inner pressure of the fuel tank.3. Remo ...