Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Fuel injector / Inspection

1. Check that the fuel injector has no deformation, cracks or other damages.

2. Measure the resistance between fuel injector terminals.

Terminal No.	Standard
1 and 2	Approx. 12.0 - (when 20°C (68°F))

Removal

1. RH SIDE1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it f ...

Installation

1. RH SIDE1. Set the fuel injector to the fuel injector pipe RH, and install the fuel injector pipe RH and fuel injector as a unit to the cylinder head.NOTE:Use new O-rings, rubbers and seal rings.2. ...

Other materials:

Airbag module disposal (deployment processing on vehicle) procedure
WARNING:Make sure to follow the instructions below. Otherwise, personal injuries may occur.• Before discarding an airbag module, always perform an operation process to prevent any false activation.• Wear protective gloves, safety goggles and earplugs during this operation. Wash your hand ...