Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the fuel pump has no deformation, cracks or other damages. 2. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 6, and inspect the fuel pump operation. WARNING: • Wipe off fuel completely. • Keep the battery as far apart from fuel pump as possible. • Do not run the fuel pump for a long time under non-load condition.
|
Removal
WARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• Catch the fuel from the tubes using a container or cloth.• If the fuel ...
Installation
1. Install the fuel pump assembly to the fuel tank.CAUTION:Set the arm and float of the fuel level sensor while paying attention to prevent them from contacting the fuel tank. If the arm of the fuel l ...
Other materials:
Precautions against vehicle modification
WARNING
To avoid accidental activation of
the system or rendering the system
inoperative, which may result
in serious injury, no modifications
should be made to any
components or wiring of the SRS
airbag system.
This includes the following modifications.
...
© 2017-2024 Copyright www.sulegacy.com
