Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Fuel pump relay / Inspection

1. Check that the fuel pump relay has no deformation, cracks or other damages.

2. Measure the resistance between fuel pump relay terminals.

Terminal No.	Standard
1 and 2	1 M- or more
3 and 4	130.4 — 230.8 - (when 20°C (68°F))

3. Connect battery positive terminal to terminal No. 3 and battery ground terminal to terminal No. 4, and measure the resistance between the fuel pump relay terminals.

Terminal No.	Standard
1 and 2	Less than 1 -

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the fuel pump relay from the main fuse box. ...

Installation

1. Install the fuel pump relay to the main fuse box.2. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Secondary pressure (line pressure) test inspection
CAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Make sure no other person is around the vehicle during secondary pressure (line pressure) test measurement.• After performing the ...