Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the intake manifold and fuel pipe assembly have no deformation, cracks and other damages. 2. Check that the hose has no cracks, damage or loose part. |
Installation
1. Install the intake manifold onto cylinder heads.NOTE:Use a new gasket.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)• RH side• LH side2. Install the bolts securing the EGR pipe ...
Disassembly
1. Remove the fuel injector pipe and the fuel hose, and remove the fuel pipe assembly.2. Remove the engine harness. General Description > COMPONENT3. Remove the EGR control valve. EGR Control Valve ...
Other materials:
Shock sensors (dealer option)
The shock sensors trigger the alarm
system when they sense impacts applied
to the vehicle and when any of their
electric wires is cut. The alarm system
causes the horn to sound and the hazard
warning flashers to flash for a short time
when the sensed impact is weak, but it
warns of a strong i ...
© 2017-2024 Copyright www.sulegacy.com
