Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Oil flow control solenoid valve / Inspection

1. Check that the oil flow control solenoid valve has no deformation, cracks or other damages.

2. Measure the resistance between the oil control solenoid terminals.

Terminal No.	Standard
1 and 2	7.4±0.5 - (when 20°C (68°F))

Removal

1. INTAKE SIDE1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving ...

Installation

1. INTAKE SIDE1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. C ...

Other materials:

Removal
Refer to “DISASSEMBLY” for removal procedures of scalp cap and mirror face. Outer Mirror Assembly > DISASSEMBLY1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOV ...