Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Control panel / Inspection

1. Check the illumination operation when battery voltage is applied between the connector terminals.

Terminal No.	Inspection conditions	Specification
2 (+) — 6 (−)	Apply battery voltage.	Light ON

2. If it does not operate normally, replace the heater control assembly.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the heater control assembly.(1) Release the clips and claws, then detach the control module cover.(2) Release the screws and clips ...

Installation

1. Install the heater control assembly.2. Install the control module cover.3. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

To open and close the trunk lid from outside
The trunk lid can be opened using the keyless access function or remote keyless entry system. For details, refer to the following section. For models with "keyless access with push-button start system", refer to "Opening trunk (Legacy)" , "Opening the trunk lid (Legacy)" or ...