Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. CHECK FUSE 1. Remove the fuse and inspect visually. 2. If the fuse is blown out, replace the fuse. NOTE: If the fuse is blown again, check the system wiring harness. |
Location
Fuse & relay box (F/B)Fuse 7.5 A (combination meter)(A)Fuse 7.5 A (combination meter)(B)NOTE:For other related fuses, refer to the wiring diagram. Power Supply Circuit ...
Other materials:
Dtc b2a08 sos button circuit
DIAGNOSIS START CONDITION:When ignition switch is ON.DTC DETECTING CONDITION:The following conditions occur for at least 50 ms.• SOS button impedance is more than 10 k-.• SOS button is stuck for at least 60 seconds.TROUBLE SYMPTOM:• SOS function cannot be used.• RED LED illum ...
© 2017-2024 Copyright www.sulegacy.com
