1. INSPECTION WITHOUT USING CAN DIAGNOSTIC Before performing diagnosis, check the following items that might affect troubles of each module. 1. Check the battery. Battery > INSPECTION Battery > INSPECTION 2. Check the fuse condition. Make sure that ampere of the fuse is setting value, and it is not blown out. 3. Check the connecting condition of harness and harness connector. 2. INSPECTION USING CAN DIAGNOSTIC Before performing diagnostics, check the following item which might affect body integrated unit malfunctions. 1. Confirm settings of body integrated unit are corresponded to vehicle equipment. Registration Body Integrated Unit > OPERATION 2. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment. User Customizing > OPERATION 3. Confirm “Factory initial setting” of body integrated unit registrations is set to “Market”. |
Removal
1. TOUCH SENSOR UPR1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the touch sensor LWR. Power Rear Gate Touch Sensor > REMOVAL3. Remove the power rear gate touch sensor UPR.CAUTION:• The touch sensor UPR can be removed only when it is defective because it is secured wit ...