Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Apply battery voltage between the connector terminals to check the lighting condition of the light. • Sedan model Terminal No. | Inspection conditions | Specification | 1 (+) — 2 (−) | Apply battery voltage. | Light ON |
• OUTBACK model Terminal No. | Inspection conditions | Specification | 1 (+) — 2 (−) | Apply battery voltage. | Light ON |
2. Replace the light assembly - high-mounted if faulty is found in the inspection. |
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel assembly - rear shelf. Rear Shelf Trim > ...
1. SEDAN MODEL1. Install the light assembly - high-mounted.2. Install the trim panel assembly - rear shelf. Rear Shelf Trim > INSTALLATION3. Connect the ground terminal to battery sensor. NOTE2. OUT ...
Other materials:
Inspection
1. RELEASE BEARINGCAUTION:Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.1. Check the bearing for smooth movement by applying force to the bearing in the radial direction.Radial direction stroke:1.6 mm (0.06 ...