Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h6do) / Engine oil filter / Inspection

1. After installing the oil filter, run the engine and check for oil leakage.

NOTE:

The filter element and filter case are permanently jointed; therefore, interior cleaning is not necessary.

2. Check the engine oil level. Engine Oil > INSPECTION

Removal

CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Drain the engine oil. Engine Oil > REPLACEMENT2. Remove ...

Installation

CAUTION:Do not tighten excessively, or oil may leak.1. Clean the oil filter installation surface of the oil cooler.2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber.3. ...

Other materials:

Installation
1. Install the intake manifold onto cylinder heads.NOTE:Use a new gasket.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)• RH side• LH side2. Install the bolts securing the EGR pipe B to the EGR control valve.NOTE:Use a new gasket.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 f ...