Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Center differential / Inspection

1. Ball bearing

Replace the ball bearing in following cases.

• In case of broken or rusty ball bearings

• In case of worn or damaged ball bearings

• When the ball bearings fail to turn smoothly or emit noise in rotation after transmission gear oil has been applied.

• When the ball bearing has other defects.

2. Center differential

If there is wear or damage, replace the center differential assembly.

Installation

1. Install the center differential and transfer driven gear into the transfer case as a unit. Transfer Driven Gear > INSTALLATION2. Select the adjusting washer. Transfer Case and Extension Case Asse ...

Disassembly

Remove the ball bearing using ST.NOTE:Center differential is a non-disassembled part which should not be disassembled.ST 498077600CENTER DIFFERENTIAL BEARING REMOVER ...

Other materials:

Inspection
• Check the forward clutch drum, internal gear, sun gear and forward clutch piston lip for wear or damage.• Inspect the drive plate facing for wear and damage.• Check the driven plate for discoloration (burnt color).• Check for worn snap ring, fatigue or damaged return spring ...