1. Taper roller bearing Replace the taper roller bearing in the following cases. • In case of broken or rusty taper roller bearings • In case of worn or damaged taper roller bearings • When the taper roller bearings fail to turn smoothly or emit noise in rotation after transmission gear oil has been applied. 2. Transfer driven gear If the tooth face of transfer driven gear and the shaft are excessively broken or damaged, replace the transfer driven gear. |
Operation
Lane Departure Prevention Deactivate Code(s) Display: The lane departure prevention deactivate code is output, when the lane keep (lane departure prevention) is canceled during the operation or the standby state is canceled.1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» di ...