1. UNIT INSPECTION Check the following items, and if there is anything out of standard value, it is considered to be damaged. If so, replace it with a new part. • Measure the whole length of the column assembly - steering. Standard: Overall length L Tilt (measure at the neutral position) and telescopic column (measure at the longest position) 857.1+1.5 −1.5 mm (33.74+0.059 −0.059 in) • Check the steering wheel deflection in axial and vertical directions. Specification: Axial deflection A (deflection of steering wheel) Less than 6 mm (0.24 in) Vertical deflection L (runout of steering wheel) Less than 17 mm (0.68 in) 2. INSPECTION OF AIRBAG SYSTEM Refer to “AIRBAG SYSTEM” section for airbag inspection procedure. Driver’s Airbag Module > INSTALLATION |
Air inlet selection
Select the air inlet by pressing the air inlet
selection button.
ON position (recirculation): Interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
for fast cooling with the air conditioner or
when driving on a dusty road. When the
ON posit ...