1. PADDLE SHIFT SWITCH 1. Measure the resistance between connector terminals. Preparation tool: Circuit tester
2. Replace the paddle shift switch if the inspection result is not within the standard value. 2. SATELLITE SWITCH ASSEMBLY Refer to “Steering Satellite Switch” of “ENTERTAINMENT” section. Switches and Harness > INSPECTION 3. SWITCH ASSEMBLY - STEERING Refer to “Steering Switch” of “INSTRUMENTATION/DRIVER INFO” section. Switches and Harness > INSPECTION |
Dtc c1571 brake lamp relay off stuck
DTC DETECTING CONDITION:A fault is detected if the stop light relay operation request were compared with the feedback signal and detected as follows:• The feedback signal is OFF.• The stop light relay operation request is ON.TROUBLE SYMPTOM:• EyeSight does not operate. (Models with ...