Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Access buzzer / Inspection

Using the Subaru Select Monitor, perform forced operation of the access buzzer. User Customizing > OPERATION

If the buzzer does not sound, replace the access buzzer.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the access buzzer.(1) Remove the clips, and turn over the mud guard - front.(2) Disconnect the connector.(3) Remove the clip and d ...

Installation

CAUTION:Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).1. Install the access buzzer.2. Connect the ground terminal to battery sensor ...

Other materials:

Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — (Newly adopted tool)SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.99099AJ000ENG ...