1. LATCH Check if the latch operates normally. If the cable or rod is faulty, replace the latch & actuator assembly - front. 2. LOCK ACTUATOR 1. Check door lock operation Check the door lock operation when battery voltage is applied between the connectors.
2. Check position switch Measure the resistance between connector terminals. Preparation tool: Circuit tester
3. Replace the latch & actuator assembly - front if it is found defective. |
Disassembly
1. Remove the chain cover securing bolt from the cylinder head LH.2. Remove the stud bolts from the cylinder head.3. Remove the valve collet, valve, valve spring retainer, valve spring and valve spring seat from the cylinder head RH.CAUTION:During work, place a waste cloth, etc. to avoid scratching ...