Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Front inner remote / Inspection

Check if the remote handle operates normally.

• If the lever is faulty, replace the remote handle.

• If the cable is deformed, replace the latch & actuator assembly - front.

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the screw, a ...

Installation

1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to cable joints.If grease is insufficient, add it as necess ...

Other materials:

Installation
CAUTION:• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION• After installing the panel center assembly, check that the air vent grille of the panel center assembly is inserted correctly into t ...