Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Front outer handle / Inspection

Check if the outer handle operates normally.

• If the lever is faulty, replace the handle - door outer.

• If the rod is deformed, replace the door latch & actuator assembly - front.

Removal

1. Raise the glass assembly - front door to the top position.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE3. Remove the trim p ...

Installation

1. Before installation, check the following items.• Rod is free from deformation.• Grease is applied sufficiently to rod joints.If grease is insufficient, add it as necessary before assemb ...

Other materials:

Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — (Newly adopted tool)SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.2. GENERAL TO ...