Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Keyless transmitter / Inspection

1. KEYLESS TRANSMITTER BATTERY

1. Measure the keyless transmitter battery voltage.

Preparation tool:

Circuit tester

NOTE:

Complete the measurement within 5 seconds because the battery discharges during measurement.

Battery terminal	Inspection Conditions	Standard
(+) — (−)	Connect resistor (A) 47 -	2.5 — 3.0 V

2. Replace the battery if the inspection result is not within the standard value. (Use CR1620 or equivalent.)

Replacement

1. REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITORNOTE:• A maximum of four keyless transmitters can be registered for each individual vehicle.• When replacing or adding the ...

1. KEYLESS TRANSMITTER BATTERYCAUTION:To prevent static electricity damage to the keyless transmitter printed circuit board, touch the steel area of building with hand to discharge static electricity ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. While pressing the shift lock release button, shift the select lever to the “N” range.3. Lift up the vehicle.4. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL5. Remove the harness stay from transmission.6. Remov ...