Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Unit inspection

Preparation tool:

Circuit tester

1. Check the resistance between connector terminals.

Terminal No.

Inspection conditions

Standard

1 — 2

OPEN

Less than 5 -

CLOSE

1 M- or more

2. If the inspection result is not within the standard, replace the button - opener rear gate.

Removal
NOTE:• The button - opener rear gate is integrated with the rear lock button.• Open the panel - rear gate before disconnecting the ground terminal from battery sensor.1. Disconnect the gro ...

Installation
CAUTION:Make sure that the harness grommet is securely installed.If not properly installed, this may cause leaks.1. Install the button - opener rear gate and rear lock button.2. Install the garnish sw ...

Other materials:

Legacy
NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. Open the trunk. Remove the trunk trim lining by removing the clips indicated in the illustration. Turn the bulb socket counterclockwise and r ...

© 2017-2024 Copyright www.sulegacy.com