Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Rear outer handle / Inspection

Check if the outer handle operates normally.

If the lever is faulty, replace the handle - door outer.

Removal

1. Raise the glass assembly - rear door to the top position.2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the trim panel - rear door. Door Trim > REMOVAL4. Remove the sealing ...

Installation

1. Before installation, check the following items.• Lever is free from deformation.• Grease is applied sufficiently to lever joints.If grease is insufficient, add it as necessary before as ...

Other materials:

Dtc p0333 knock/combustion vibration sensor 2 circuit high bank 2
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Driving performance problem• Knocking occursCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGR ...