Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. CHECK FUSE

1. Remove the fuse and inspect visually.

2. If the fuse is blown out, replace the fuse.

NOTE:

If the fuse is blown again, check the system wiring harness.

2. CHECK RELAY

1. Measure the resistance between relay terminals.

Terminal No.

Inspection conditions

Standard

Circuit

1 — 2

Always

1 M- or more

1 — 2

Apply battery voltage between terminals 4 and 3.

Less than 1 -

Terminal No.

Inspection conditions

Standard

Circuit

1 — 4

Always

1 M- or more

1 — 4

Apply battery voltage between terminals 2 and 3.

Less than 1 -

Terminal No.

Inspection conditions

Standard

Circuit

1 — 2

Always

1 M- or more

1 — 4

Always

Less than 1 -

1 — 2

Apply battery voltage between terminals 3 and 5.

Less than 1 -

2. Replace the relay if the inspection result is not within the standard value.

Location
Main fuse box (M/B)Fuse 15 A (body integrated unit)(A)Fuse 15 A (body integrated unit)(B)Fuse & relay box (F/B)Fuse 10 A (body integrated unit, immobilizer antenna)(C)Fuse 7.5 A (keyless access CM)(D) ...

Remote openers
...

Other materials:

Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Remove the trunk opener switch.(1) Release the claws and remove the trunk opene ...

© 2017-2024 Copyright www.sulegacy.com