Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Terminal No.

Inspection conditions

Standard

1 — 4

Switch OFF

1 M- or more

Switch ON

Less than 1 -

2. Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.

Terminal No.

Inspection conditions

Specification

2 (+) — 3 (−)

Apply battery voltage.

Light ON

3. If the inspection result is not within the standard, replace the switch - trunk opener.

Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Low ...

Installation
1. Install the switch - trunk opener.2. Install the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > INSTALLATION3. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Check list for interview check
• Inspect the following items regarding the vehicle’s state.• Print out this page for interviewing customers.Combination Meter Check List for Interview Date the Vehicle is Received Year Month DayCustomer’ ...

© 2017-2024 Copyright www.sulegacy.com