1. COMMUNICATION FOR INITIALIZING IMPOSSIBLE When communication with DCM is impossible DETECTING CONDITION: • Defective harness connector • Power supply circuit malfunction • Defective DCM • Defective CAN communication circuit • Defective Subaru Select Monitor TROUBLE SYMPTOM: Communication is impossible between DCM and Subaru Select Monitor. CAUTION: CommCheck is required after replacing the DCM. Telematics System > OPERATION WIRING DIAGRAM: NOTE: For the coupling connector, refer to “WIRING SYSTEM”. Telematics Telematics System > WIRING DIAGRAM
|
Fuel gauge
The fuel gauge shows the approximate
amount of fuel remaining in the tank.
When the ignition switch is in the "LOCK"/
"OFF" or "ACC" position, the fuel gauge
shows "E" even if the fuel tank contains
fuel.
The gauge may move slightly due to fuel
level movement in the tank (e.g., during
...