Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Front magnetic encoder / Inspection

Visually check the magnetic encoder for any damage. If necessary, replace with a new hub unit COMPL - front axle.

NOTE:

Because the magnetic encoder is integrated with hub unit COMPL, replace the hub unit COMPL with a new part if there is any defect found on the magnetic encoder.

Removal

Refer to “Front Hub Unit Bearing” for removal, because the front magnetic encoder is integrated with the hub unit COMPL - front axle. Front Hub Unit Bearing > REMOVAL ...

Installation

Refer to “Front Hub Unit Bearing” for installation, because the front magnetic encoder is integrated with the hub unit COMPL - front axle. Front Hub Unit Bearing > INSTALLATION ...

Other materials:

Replacement
1. Remove the pad - disc brake front.• 16-inch type: Front Brake Pad > REMOVAL• 17-inch type: Front Brake Pad > REMOVAL2. Press back the piston - disc brake.3. Install the pad - disc brake front. Front Brake Pad > INSTALLATION• 16-inch type: Front Brake Pad > INSTALLATION• ...