Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. CHECK FUSE

1. Remove the fuse and inspect visually.

2. If the fuse is blown out, replace the fuse.

2. CHECK RELAY

1. Measure the resistance between relay terminals.

Terminal No.

Inspection conditions

Standard

Circuit

1 — 2

Always

1 M- or more

1 — 4

Always

Less than 1 -

1 — 2

Apply battery voltage between terminals 3 and 5.

Less than 1 -

2. Replace the relay if the inspection result is not within the standard value.

Location
Main fuse box (M/B)Fuse 40 A(A)Fuse 30 A(B)Brake light relay(C)Fuse & relay box (F/B)Fuse 7.5 A(D)NOTE:For details concerning other fuses and relays, refer to the wiring diagram. Power Supply Circuit ...

Steering angle sensor
...

Other materials:

Installation
1. Install the reduction drive gear to secondary pulley.2. Select the reduction drive gear shim. Reduction Drive Gear > ADJUSTMENT3. Install the dish plates, spring retainers, and selected reduction drive gear shims.NOTE:Install the dish plate in the correct direction.(A)Reduction drive gear shim(B ...

© 2017-2024 Copyright www.sulegacy.com