Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Intake (induction)(h4do) / Air intake boot / Inspection

1. Check that the air intake boot has no deformation, cracks or other damages.

2. Inspect that no foreign objects are mixed in the air intake boot.

Removal

1. Remove the clip (A) from the air intake boot.2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.3. Loosen the clamp (C) which secures the throttle body to the air i ...

Installation

1. Install the air intake boot, and connect the PCV hose.2. Tighten the clamp (C) securing the throttle body to the air intake boot.Tightening torque:3 N·m (0.3 kgf-m, 2.2 ft-lb)3. Tighten the ...

Other materials:

Dtc p2402 evap system leak detection pump control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON ST ...