1. Check that the following operations perform normally. CAUTION: Fix the motor to prevent the motor from being shorted by moving during operation. (1) When the battery is connected to the terminal of connectors, confirm that the motor operates at low speed. (2) When the battery is connected to the terminal of connectors, confirm that the motor operates at high speed. (3) Connect the battery to terminals of the connector, and remove the terminal connection with motor rotating at low speed, and stop the motor assembly - windshield wiper in mid-operation. (4) Connect the battery and check that the motor stops at the automatic stop position after the motor operates at low speed again. NOTE: Replace the motor assembly - windshield wiper if the inspection result is not within the standard. 2. Install the motor assembly - windshield wiper. Front Wiper Motor and Link > INSTALLATION |
Tire
Model2.5 L DOHC non-turbo3.6 L DOHC non-turboWheel size17 - 7J18 - 7JTire size225/65R17 102H225/60R18 100HTypeTubeless, steel belted radial ...