CAUTION: Fix the motor to prevent the motor from being shorted by moving during operation. 1. Connect the battery to the motor assembly - rear wiper connector, and check that the motor assembly - rear wiper operates. 2. Connect the battery to terminals of the connector, and remove the terminal connection with motor rotating, and stop the motor in mid-operation. 3. Connect the battery and check that the motor stops at the automatic stop position after the motor operates at low speed again. |
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Remove the bolts, and then remove the panel - knee guard.4. Release the lock and remove the relay holder.5. Remove the auto headlight beam ...