Honda Civic manuals

Subaru Legacy Service Manual: Inspection

Symptoms

Inspection order

All power windows do not operate.

(1) Check the fuse.

(2) Check the power window relay.

(3) Check the wiring harness.

Particular window does not operate.

(1) Check the fuse.

(2) Check the switch - power window main.

(3) Check the switch - power window sub.

(4) Check the power window motor.

(5) Check the wiring harness.

“Window Lock” does not operate.

Check the switch - power window main.

Driver’s side window moves slightly (approx. 20 mm (0.79 in)).

(1) Check the motor - front.

(2) Check the switch - power window main.

(3) Check the wiring harness.

Driver’s side window moves slightly (approx. 50 mm (1.97 in)). (This status is not a failure.)

Perform reset operation A. Power Window System > OPERATION

Driver’s side window does not close completely. (Using AUTO UP allows the window to fully close first and then move in reverse resulting in slightly opening.)

Perform reset operation B. Power Window System > OPERATION

Wiring diagram
Refer to “Power Window System” in the wiring diagram. Power Window System > WIRING DIAGRAM ...

Operation
1. RESET OPERATION A1. Sit in the driver’s seat and close the door.2. Turn the ignition switch to ON.3. Operate the switch - power window main to open the glass assembly - front door halfway.4. ...

Other materials:

Rear wiring harness lh location
ConnectorConnecting toNo.PoleColorAreaNo.DescriptionAB52YC-3 Seat cushion airbag module LHAB1722YB-3 Airbag CMAB192YC-3 Side airbag module LHAB212BC-4 Pretensioner LHAB234YB-4 Side airbag sensor LHR94B-4 Front door switch LHR108B-4D22Rear door cord LHR406C-2i128Instrument panel wiring harnessR4818LC ...

© 2017-2022 Copyright www.sulegacy.com