Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Communication system / Horn / Inspection

1. Remove the horn assembly (Hi side & Lo side). Horn > REMOVAL

2. Check the horn sounds when applying the battery voltage to the horn assembly.

• Horn assembly - Lo side

Terminal No.	Inspection conditions	Specification
1 (+) — Horn case (−)	Connect battery to the terminals	Sounds

• Horn assembly - Hi side

Terminal No.	Inspection conditions	Specification
1 (+) — Horn case (−)	Connect battery to the terminals	Sounds

3. If it does not operate normally, replace the horn assembly.

Removal

CAUTION:When removing the horn, do not remove the bumper face – front. Bracket connection portion of the bumper face may become damaged.1. Disconnect the ground terminal from battery sensor. NOTE2. ...

Installation

CAUTION:Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).1. Install the h ...

Other materials:

Removal
CAUTION:Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION1. Remove the headrest assembly - front.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting ...