Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Measure the resistance between connector terminals. Connector | Terminal No. | Inspection conditions | Standard | (a) | 1 — 3 | Open | Less than 1 - | 4 — 3 | Close | Less than 1 - | (b) | 1 — 3 | Tilt down | Less than 1 - | 4 — 3 | Tilt up | Less than 1 - |
2. Replace the sunroof switch if the inspection result is not within the standard value. |
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the overhead console. (Models without EyeSight) Spot Map Light > REMOVAL3. Remove the stereo camera cover assembly. (Models with ...
CAUTION:For installation of the stereo camera cover, refer to “INSTALLATION”, “Stereo Camera” in the “EyeSight” section and observe the precautions for installation ...
Other materials:
Removal
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the transfer clutch assembly. Transfer Clutch > REMOVAL4. Remove the transfer driven gear assembly. Transfer Driven Gear > REMOVAL5. Remove the parking pa ...