Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. CVT MODEL 1. Install the brake pedal assembly. CAUTION: • Apply grease to the snap pin to prevent the operating rod from wear. • Replace the clevis pin with new parts, and apply thin coat of NIGTIGHT LYW No. 2 grease to the clevis pin. Tightening torque: Brake pedal: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the column assembly - steering. Steering Column > INSTALLATION 3. Install the panel - knee guard. Tightening torque: 7 N·m (0.7 kgf-m, 5.2 ft-lb) 4. Install the cover assembly - instrument panel LWR driver. 5. Connect the ground terminal to battery sensor. NOTE 6. Check that the brake light operate properly. 7. Check the brake pedal after installation. Brake Pedal > INSPECTION 2. MT MODEL NOTE: Brake pedal is integrated with the clutch pedal. For installation procedure of the brake pedal, refer to Clutch section. Clutch Pedal > INSTALLATION |
Inspection
1. Move the pad - brake pedal in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is in the range of specifications.CAUTION:If excessive deflecti ...
Brake pipe
...
Other materials:
Dtc b2311 rear radar detect tcm
DTC DETECTING CONDITION:Automatic transmission fails.TROUBLE SYMPTOM:• All functions of BSD/RCTA stop.• Fail icon is displayed in the combination meter LCD display.• Failure-related notification is displayed for approx. two seconds on LCD display in the combination meter.• AT ...
