CAUTION: • Be careful of the following items. Failure to do so may cause the airbag system malfunction. – Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of “AIRBAG SYSTEM”. General Description > CAUTION – Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column. • Be careful not to damage the airbag system wiring harness when servicing the center brake pipe. • When installing the brake pipe, do not bend. • After installing the brake pipe and hose, perform air bleed. • After installing the brake hoses, make sure that they do not contact the tires or suspension assembly, etc. NOTE: The airbag system wiring harness is routed near the center brake pipe. Tightening torque: Front brake pipes & hoses: General Description > COMPONENT Center & rear brake pipes and hoses: General Description > COMPONENT |
Installation
CAUTION:• Install the bumper face - front so that the front end of the under cover (b) comes inside the bumper face - front (a).• Before installing the bumper face, match the claws on the bracket - front bumper with the engaging position of flange section on the bumper face side. If the ...