1. Temporarily install the drive plate and reinforcement drive plate. NOTE: Align the knock pin hole of the crankshaft position sensor plate to the knock pin of the crankshaft to secure the knock pin. 2. Set the ST. NOTE: Set the ST to the drive plate referring to the illustration.
3. Tighten the drive plate mounting bolt in two stages. (1) Tighten the drive plate mounting bolt. Tightening torque: 30 N·m (3.1 kgf-m, 22.1 ft-lb) (2) While checking the tightening angle with the angle gauge, tighten the drive plate mounting bolts to the specified angle. Tightening angle: 30° — 35° 4. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION |
Installation
1. FRONT DIFFERENTIAL SIDE1. Install the air breather hose.NOTE:Securely insert the air breather hose until the hose end contacts the catch of the transmission hanger.2. Install the air intake boot assembly. Air Intake Boot > INSTALLATION2. TRANSMISSION CASE SIDE1. Install the air breather hose.2. ...