1. Clean the mating surface of extension case and transmission case. 2. Select the transfer drive gear shim. Reduction Drive Gear > ADJUSTMENT 3. Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT 4. Attach the selected transfer drive gear shim to extension case with vaseline. 5. Attach the selected transfer driven gear shim to extension case with vaseline. 6. Install the O-ring to the transmission case. NOTE: • Use new O-rings. • Apply CVTF to the O-rings. 7. Apply liquid gasket to extension case seamlessly. Liquid gasket: THREE BOND 1215B or equivalent 8. Install the extension case to transmission hanger. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 9. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION |
Dtc b2249 bluetooth module
DTC DETECTING CONDITION:• Detected when a connection between the Bluetooth module is lost (or there has already been no connection) and the connection cannot be established even after trying to reset the Bluetooth module hardware three times.• Detected when the connection with the Blueto ...