1. Set the range select lever to the “N” range. 2. Install the parking pawl shaft, return spring and parking pawl. NOTE: Make sure that the end of return spring sticks out of parking pawl as shown in (a). Make sure that the other end contacts the rib of transmission case as shown in (b).
3. Install the extension case. Extension Case > INSTALLATION 4. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION |
Dtc p1451 evap system clog detected (pipe)
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK DRAIN TUBE BETWEEN CANISTER AND LE ...