1. Install the thrust bearing. NOTE: Make sure to install in the right direction. 2. Install the transfer clutch assembly. 3. Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT 4. Attach the selected transfer driven gear shim to extension case with vaseline. 5. Remove the transfer clutch assembly. 6. Install the seal ring to the transfer clutch assembly. NOTE: • Use new seal rings. • When installing the seal rings, do not expand the seal rings too much. • Apply CVTF to the seal rings. 7. Install the seal ring to the transfer driven gear assembly. NOTE: • Use new seal rings. • When installing the seal rings, do not expand the seal rings too much. • Apply CVTF to the seal rings. 8. Install the transfer clutch assembly. 9. Install the extension case. Extension Case > INSTALLATION 10. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION |
2.5 L models
1) Brake fluid reservoir/Clutch fluid reservoir
(MT) (page 11-20)
2) Fuse box (page 11-38)
3) Windshield washer tank (page 11-32)
4) Battery (page 11-37)
5) Engine oil filler cap (page 11-11)
6) Engine coolant reservoir (page 11-15)
7) Radiator cap (page 11-15)
8) Engine oil filter (page ...