1. Install the parking support. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 2. Install the extension case. Extension Case > INSTALLATION 3. Install the manual valve. 4. Install the parking rod to the manual plate. 5. Insert the parking rod into the transmission case, and install the shift connecting rod of the manual valve to the manual plate.
6. Insert the shifter arm shaft to the transmission assembly, install the manual plate to the shifter arm shaft, and secure the shifter arm shaft with a bolt. NOTE: Do not damage the lip of oil seal press-fitted in the case. Tightening torque: 7 N·m (0.7 kgf-m, 5.2 ft-lb) 7. Install the detent spring. Tightening torque: 7 N·m (0.7 kgf-m, 5.2 ft-lb) 8. Install the spring pin. NOTE: Use new spring pin. 9. Install the inhibitor switch. Inhibitor Switch > INSTALLATION 10. Adjust the inhibitor switch. Inhibitor Switch > ADJUSTMENT 11. Install the oil strainer and oil pan. Oil Pan and Strainer > INSTALLATION 12. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION |
Accessory power outlets
Power outlet below the climate control
Power outlet in the center console (if equipped)
Power outlet in the cargo area (Outback)
Accessory power outlets are provided
below the climate control, in the center
console and in the cargo area. Electrical
power (12V DC) from the battery i ...