Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / X mode switch / Installation

NOTE:

Refer to “X Mode Switch” for installation of the X mode switch. X MODE Switch > INSTALLATION

Inspection

1. CHECK SWITCH UNITMeasure the resistance between harness connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON ( ...

Continuously variable transmission(tr690)

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).4. Loosen the clamp (C) which connects the air intake boot and throttle body.5. Remove the air intake boot fr ...