1. Install the CVTF cooler (air cool). Tightening torque: 12 N·m (1.2 kgf-m, 8.9 ft-lb) 2. Install the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. NOTE: Use new CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. 3. Install the headlight assembly LH. Headlight Assembly > INSTALLATION 4. Install the front bumper. Front Bumper > INSTALLATION 5. Install the battery. Battery > INSTALLATION |
Inspection
1. BACK-UP LIGHT SWITCH1. Turn the ignition switch to OFF.2. Disconnect the back light switch connector.3. Measure the resistance between the back-up light switch terminals.Gear shift positionTerminal No.Specified resistanceReverse position1 and 2Less than 1 -Other positions1 M- or more4. Replace fa ...