CAUTION: When installing the CVTF cooler pipe assembly on vehicle side, be careful not to bend the A/C pipe. 1. Install the CVTF cooler pipe assembly to vehicle. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the A/C pipe to clip. 3. Install the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. (OUTBACK model) NOTE: Use new CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. 4. Install the headlight assembly LH. (OUTBACK model) Headlight Assembly > INSTALLATION 5. Install the front bumper. (OUTBACK model) Front Bumper > INSTALLATION 6. Install the battery cable bracket, and install the battery cable clip to the bracket. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 7. Lift up the vehicle. 8. Install the CVTF CVT inlet hose and CVTF CVT outlet hose. NOTE: Use new CVTF CVT inlet hose and CVTF CVT outlet hose. 9. Install the CVTF radiator inlet hose and CVTF radiator outlet hose on radiator side. NOTE: Use new CVTF radiator inlet hose and CVTF radiator outlet hose. 10. Install the front exhaust pipe. Front Exhaust Pipe > INSTALLATION 11. Lower the vehicle. 12. Install the engine coolant reservoir tank. Reservoir Tank > INSTALLATION 13. Install the battery and battery box. Battery > INSTALLATION 14. Adjust the CVTF level and check there is no leakage. CVTF > ADJUSTMENT |
Engine
Model2.5 L DOHC non-turbo3.6 L DOHC non-turboEngine typeHorizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engineHorizontally opposed, liquid cooled, 6-cylinder, 4-stroke gasoline engineValve arrangementDOHCBore - strokemm (in)94.0 - 90.0 (3.70 - 3.54)92.0 - 91.0 (3.62 - 3.58)Displac ...