1. Temporarily install the drive plate and reinforcement drive plate. 2. Set the ST. NOTE: Set the ST to the drive plate referring to the illustration.
3. Tighten the drive plate mounting bolt in two stages. NOTE: Fix the engine unit. (1) Tighten the drive plate mounting bolt. Tightening torque: 10 N·m (1.0 kgf-m, 7.4 ft-lb) (2) While checking the tightening angle with the angle gauge, tighten the drive plate mounting bolts to the specified angle. Tightening angle: 41° — 45° 4. Install the transmission assembly to the vehicle. Automatic Transmission Assembly > INSTALLATION |
Installation
CAUTION:• When removing or installing the roof rail, be careful not to scratch the body panel with the stud bolt of roof rail.• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION• When rem ...