Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. Select a washer. Forward Clutch Assembly > ADJUSTMENT

2. Install the selected washer.

3. Install the forward clutch assembly.

4. Install the thrust needle bearing.

NOTE:

Install the thrust needle bearing in the correct direction.

5. Install the intermediate case. Intermediate Case > INSTALLATION

6. Install the transfer reduction driven gear assembly. Transfer Reduction Driven Gear > INSTALLATION

7. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION

8. Install the rear drive shaft. Rear Drive Shaft > INSTALLATION

9. Install the extension case. Extension Case > INSTALLATION

10. Install the transmission to vehicle. Automatic Transmission Assembly > INSTALLATION

Adjustment
1. Measure depth “A” from the ST upper face to the washer catch surface.ST 398643600GAUGE2. Install the forward clutch assembly to intermediate case.3. Setting the ST, measure height &l ...

Inspection
• Check the forward clutch drum, internal gear, sun gear and forward clutch piston lip for wear or damage.• Inspect the drive plate facing for wear and damage.• Check the driven plat ...

Other materials:

Dtc b14b4 seat heater thermistor circuit short-circuit (driver)
DTC DETECTING CONDITION:Short-circuit in seat heater thermistor.TROUBLE SYMPTOM:Seat heater RH does not function.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Seat Heater System Seat Heater System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK CONNECTOR.1) Check connec ...

© 2017-2024 Copyright www.sulegacy.com