Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Front reduction driven gear / Installation

NOTE:

For installation of front reduction driven gear, refer to the “Front Reduction Drive Gear”. Front Reduction Drive Gear > INSTALLATION

Adjustment

1. If the ball bearing is attached, remove the bearing and shims. Converter Case Cover > REMOVAL2. Using the ST, measure height “A” from the ST upper face to the mating surface of the cas ...

Inspection

• Check the drive plate for wear and damage.• Check the driven plate for discoloration (burnt color).• Check for worn snap ring, fatigue or damaged return spring or deformed piston r ...

Other materials:

Disassembly
1. BUSHING A - TRAILING LINKUsing the ST, push out the bushing A - trailing link.Preparation tool:ST-A: INSTALLER (899874100)ST-B: PRESS (499755602)2. BUSHING - TRAILING LINKFor the removal procedure of bushing - trailing link, refer to “Rear Axle” in the “DRIVE SHAFT SYSTEM” ...