Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Reverse brake assembly / Installation

NOTE:

For installation of reverse brake assembly, refer to “Intermediate Case”. Intermediate Case > INSTALLATION

Assembly

1. Apply CVTF to the seal of reverse brake piston and install it to intermediate case.2. Install the return spring.3. Set the spring retainer and snap ring.(A)Snap ring(B)Spring retainer4. Set the ST1 ...

Inspection

• Inspect the drive plate facing for wear and damage.• Check the driven plate for discoloration (burnt color).• Check for worn snap ring, fatigue or damaged return spring or deformed ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the under cover. Front Under Cover > REMOVAL3. Drain the engine oil. Engine Oil > REPLACEMENT4. Disconnect the connector of the oil level switch from the engine harness, and remove the clip securing the harness to the front cams ...