Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transfer reduction driven gear / Installation

1. Install the reduction driven gear assembly.

2. Select shims. Transfer Reduction Driven Gear > ADJUSTMENT

3. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION

4. Install the rear drive shaft. Rear Drive Shaft > INSTALLATION

5. Mount the selected shim onto ball bearing.

6. Install the extension case. Extension Case > INSTALLATION

7. Install the transmission assembly to the vehicle. Automatic Transmission Assembly > INSTALLATION

Adjustment

1. Measure depth “A” from the ST upper face to the ball bearing catch surface.ST 398643600GAUGE2. Measure height “B” from the ST to the end of the ball bearing outer ring.ST ...

Inspection

• Check the ball bearing for smooth rotation.• Check the ball bearing for excessive looseness.• Make sure the gear is not broken or damaged. ...

Other materials:

Inspection
1. Moving the front tire up and down by hand, check there is no play in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect the lean of axis ...