Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the rear cushion rubber on the transmission. Tightening torque: 40 N·m (4.1 kgf-m, 29.5 ft-lb)
2. Install the transmission rear crossmember. Tightening torque: T1: 35 N·m (3.6 kgf-m, 25.8 ft-lb) T2: 75 N·m (7.6 kgf-m, 55.3 ft-lb)
3. Remove the transmission jack. 4. Install the center exhaust cover. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb)
5. Install the front exhaust pipe. Front Exhaust Pipe > INSTALLATION 6. Connect the ground terminal to battery sensor. NOTE |
Inspection
• Check the crossmember for bends or damage.• Check that the cushion rubber is not stiff, cracked or otherwise damaged. ...
Variator chain
...
Other materials:
Inspection
1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION2. Disconnect the Subaru Select Monitor. While bringing the access key, operate the touch sensor on door handle to check if door lock or unlock operates.3. Disconne ...
