1. Clean all the parts before assembly. 2. Insert the solenoid unit terminals to the harness connector.
3. Install the solenoid unit. NOTE: • Insert the solenoid unit while raising the shift lock plate upward by finger, and insert the tip of cushion solenoid into the hole of shift lock plate. • Apply 0.2 g (0.007 oz) of Multemp D to the tip of cushion solenoid. • After installation, make sure that the tip of cushion solenoid is securely inserted in the shift lock plate by visually checking from the side of plate COMPL.
4. Install the harness to the select cover COMPL. 5. Attach the harness connector. 6. Install the spacer and the gasket. Select Lever > INSTALLATION 7. Install the select lever. Select Lever > INSTALLATION |
Removal
1. 16-INCH TYPE1. Lift up the vehicle, and then remove the front wheels.2. Remove the union bolt and the caliper bolt, and remove the caliper body assembly.CAUTION:• Do not allow brake fluid to come in contact with the painted surface of the vehicle body. If it does, wash off with water and wi ...